Tile Cleaning

MAINTAIN THE HARD SURFACES IN YOUR HOME.

We use the HydroForce SX-12 that blasts dirt and soil from grout and tile as well as smooth & rough hard surfaces. It not only provides an incredible dirt blasting power working from 700 hundred to 2000 psi but it contains all the runoff which gets drawn away. Some floors may need the extra work of a floor buffer when they are deeply soiled. After throughly cleaning, sealant is applied to protect your tile and grout for years to come.
Other hard surfaces such as marble, slate or other natural stone are all treated differently than tile because high pressure can cause damage to your floors. Whatever your need is we have a solution.

Bathroom Tiles

Frequently Asked Questions

FAQ
Why Clean Your Tile and Grout?

Over time, dirt and grunge builds up on the surface of your tile and grout causing your surfaces to dull and discolor. Just like carpet cleaning, we can eliminate the stubborn dirt and protect your surfaces for years to come.

How Often Should I Clean My Tile Surfaces?

This depends on many factors such as foot traffic, pets, kids, and how often the floor is routinely cleaned.

How Long Does the Process Take?

A typical area is around 300 square feet which would take anywhere from 30 minutes to 60 minutes. Lots of factors effect this time like room configuration, soil level, and if your having your room sealed after. The whole process can take 2 to 3 hours to completion.

Why You Should Seal Your Grout

Grout is very porous which allows dirt and liquids to penetrate deep into the grout. By sealing it, you add a layer of protection over your surface which buys you time to clean up the spill or dirt before it seeps in down deep.

How Long Will It Take To Dry?

Wait until the sealant has fully setup which can take 12 to 24 hours before placing anything back on it.

Cleaning Your Floors After Sealing?

Clean regularly to keep your tile and grout looking pristine. Try to avoid leaving liquid/spills on your floor.

Why Clean Your Tile and Grout?

Over time, dirt and grunge builds up on the surface of your tile and grout causing your surfaces to dull and discolor. Just like carpet cleaning, we can eliminate the stubborn dirt and protect your surfaces for years to come.

How Often Should I Clean My Tile Surfaces?

This depends on many factors such as foot traffic, pets, kids, and how often the floor is routinely cleaned.

How Long Does the Process Take?

A typical area is around 300 square feet which would take anywhere from 30 minutes to 60 minutes. Lots of factors effect this time like room configuration, soil level, and if your having your room sealed after. The whole process can take 2 to 3 hours to completion.

Why You Should Seal Your Grout

Grout is very porous which allows dirt and liquids to penetrate deep into the grout. By sealing it, you add a layer of protection over your surface which buys you time to clean up the spill or dirt before it seeps in down deep.

How Long Will It Take To Dry?

Wait until the sealant has fully setup which can take 12 to 24 hours before placing anything back on it.

Cleaning Your Floors After Sealing?

Clean regularly to keep your tile and grout looking pristine. Try to avoid leaving liquid/spills on your floor.

(503) 597-8326

  • Facebook Social Icon
  • Yelp Social Icon

©2017 by Mr Steam Carpet Cleaning.